YETI - Logo
YETI
YETIProductsWhat's a Yeti On the waySupport
  Crystal Down  |  Material  |  Workmanship  |  Construction  |  Temperature Information  |  Care
YETI
GlossarMaterial



Glossar

90:10 800+ inch3

Describes the mixing ratio of downs and feathers in weight per cent as well as the bulking power of the downs. In our example, a filling of 100 grams would contain 90 grams downs and ten grams feathers. 800+ inch3 means that under a standard weight a certain number of downs maintain a volume of 800 cubic inch.


7 hole Hollow Fiber

Polyester filling. Consists of hollow fibres with seven channels which store air and transport humidity away from the body. Water-resistant and fast-drying. Isolates the „Junior“

sleeping bag.


AquaPro Plus

Ripstop-tissue of nylon with a membrane. Water-proof and breathing. Protects the

down against humidity, e.g. used for the „Powerizer“ sleeping bag.


Aqua-Skin

100 per cent water-proof and wind-resistant, but breathing laminates. The seams, usually “water bridges“ because of the pricks, are sticked – „taped“.


Bulking power

Also called loft or fillpower. Enabled by the natural elasticity of the keratin, the horn substance where downs consist of. It is measured by putting an unze (= 28 grams) downs in a standardised flask and loading it with with a standard weight. The volume which the downs contain under this weight is the bulking power in cubic inch (inch3). The more, the better the insulation. 900+ such as regarding the Companyon products currently provide the unsurpassed highest quality.


Climashield

Insulating micro-fibre tissue: extremely soft, elastic and light. Inside hollow, macaronsimilar fibres. Do not absorb humidity, but transport it immediately to the outside. Fast-drying and water-resistant. Serves as a synthetic filling material in „Elements“-sleeping bags.


Companyon

Line of sleeping bags and outer garments where Yeti has combined the extraordinary

precious and tear-proof nylon fibre "LightyGram with the best down quality of the" Crystal Down. Used e.g. for „Passion“-sleeping bags , the „Solace“ waistcoat and the ladies jacket „Desire“.

Further informations » Companyon-Series


Crystal Down

Filling with at least 90 downs of class I (according to DIN EN 12934), gained from

grown-up geese on European farms in the death-pluck procedure. The little branches are about two centimetres from the core to the end, and therefore enclose large insulating air cushions. Regular controls at the laboratories of the globally acknowledged International Down and Feather Labaratory.


Dry-Skin

Products of this group transport humidity from the body to the outside within shortest

time. They are fast-drying, light, small foldable and protect the skin against UV-radiation with the factor 30+ and above. Particularly suitable in tropical and subtropical regions.


Fillpower See » Bulking power.


Big question: Synthetics or down?

Often provides for spinning heads during purchase. Four factors are important: Insulation, weight, compressibility and dryness. With regard to the first three, Crystal Downs are unbeatable: No material on this planet warms better and at the same time is incredibly light and foldable to such a small unit like this natural product. Downs provide for a comfortable sleeping climate and transport humidity to the outside. However, not as fast like synthetics: polyster fillings dry faster. Whoever expects his sleeping bag becomes often wet and does not have time to have it dried, is better off with the „Elements“.

 

LightyGram

Ripstop-tissue of nylon thread, ten times thinner than a human hair. Very soft and

dense, therefore water resistant and breathing, at the same time tear-proof. A thread of a length from Berlin to Görlitz would be sufiicient to weave one square metre Lighty-Gram; its weight would be 25 grams.Used in the Companyon line and „Yamazaki collection”.


Loft See » Bulking power.


MicroCell

Microscopically fine, calendered Ripstop-tissue of polyester; wind- and water-resistant and breathing. Used e.g. for the „Powerizer“sleeping bag.


Mixing ratio down-feather

Decides about the insulation and filling weight. The higher the down proportion, the lighter and warmer. A hundred per cent down proportion is practically impossible. Now and then it is said a feather residue supports the bulking power, but this is a white lie. It is possible to separate downs and feathers from each other in air-flow channels until only tiny feather parts are left; and is also possible to even select this residue. However, by hand only, which would be extremely expensive and not appropriate compared to the quality benefit.


Move-Skin

Extremely flexible material. High humidity transport, fast-drying and smell-obstructive thanks to Cocona coconut fibres. The UV-protection 50+ complies with Australian standard.


SoftCell

WSoft nylon tissue, transports humidity to the outside within short time. Fast-drying, breathing. Used as lining fabric of „Sunrizer“ and „Fusion“ sleeping bags.


Soft-Skin

Supple, elastic, wind-resistant material. Warms excellent, is above all used for Softshells.


SupCell

Extremely soft, ultra-light and fast-drying Ripstop-tissue of nylon. Transports humidity to the outside. Used as lining fabric for the sleeping bags „Elements“ and „V.I.B.“.


Trec-Skin

Tear-resistant, easy-care, fast-drying, robust, light, small foldable. These textiles protect against UV-radiation with a factor of 30+ and higher.


UltraCell

Smooth and soft light-weight material of nylon with highest breathability. Lining fabric for example for the sleeping bags „Elements“ und „V.I.B.“.


Yeti Ethical Code

Introduced as an initiative against cruel goose keeping. The coding system makes origin, rearing and refinement of the down transparent. For example, 800RP1PWKG955 means: down with 900 inch3, thus the highest possible bulking power, from the Poznan region, farm operation 1, from a Polish White Koluda Goose, filling of 95 per cent down, five percent feathers.


Yeti Protection Skins

Every year, Yeti selects the best and most innovative fabrics of textile manufacturers in all over the world for processing their products. Wearing comfort and technical characteristics for the first, second and third clothing layer are decisive. Protection Skins are divided in Aqua-Skin, Move-Skin, Soft-Skin, Trec-Skin und Dry-Skin.


 




YETI Protection Skins

DFeel comfortable in every type of weather that nature may cast your way.


All of Yeti’s Protective Skins are breathable, wind-resistant and water-repellent.



Yeti Konstruktion



Yeti chooses the best new and innovative materials from textile producers worldwide for the manufacture of their products,

taking into consideration the latest patents, current tests and tradeshow innovations from across the world which demonstrate the quality of the textile.


In the design and manufacture of Yeti’s products, both wearing comfort and technical attributes are taken into consideration. Yeti possesses a wide breadth of knowledge and experience in the implementation of high tech materials that are at once protective and comfortable.

 

 

ALL WEATHER PROOF


Yeti Konstruktion




TEAR PROOF / QUICK-DRYING


Yeti Konstruktion




LIGHT & CUDDLY


Yeti Konstruktion




QUICK - DRYING


Yeti Konstruktion




FLEXIBLE & BREATHABLE


Yeti Konstruktion

Contact  |  Impress  |  Disclaimer  |  Banner  |  Newsletter Seite als Druckversion anschauen  Print